Showing posts with label Mech info's. Show all posts

Gnome Rotary Engine

Thursday, July 4, 2013
Posted by Unknown

Gnome Rotary Engine

The Gnome was one of several rotary engines popular on fighter planes during World War I. In this type of engine, the crankshaft is mounted on the airplane, while the crankcase and cylinders rotate with the propeller.
The Gnome was unique in that the intake valves were located within the pistons. Otherwise, this engine used the familiar Otto four stroke cycle. At any given point, each of the cylinders is in a different phase of the cycle. In the following discussion, follow the master cylinder with the green connecting rod.
Gnome, intake

Intake

During this portion of the stroke, a vacuum forms in the cylinder, forcing the intake valve open and drawing the fuel-air mixture in from the crankcase.
Gnome, compression"

Compression

The mixture is compressed during this phase. The spark plug fires toward the end of the compression stroke, slightly before top dead center.
Gnome, power

Power

The power stroke happens here. Note that the exhaust valve opens early—well before bottom dead center.
Gnome, exhaust

Exhaust

This engine has a fairly long exhaust stroke. In order to improve power or efficiency, engine valve timing often varies from what one might expect.

When I first learned how these engines worked, I thought the only person crazier than the engine designer was the one who paid money for it. At first glance it seems ridiculously backwards.
Nonetheless, a number of engines were designed this way, including the Gnome, Gnome Monosoupape, LeRhone, Clerget, and Bentley. It turns out there were some good reasons for the configuration:
  • Balance

    Note that the crankcase and cylinders revolve in one circle, while the pistons revolve in another, offset circle. Relative to the engine mounting point, there are no reciprocating parts. This means there’s no need for a heavy counterbalance.
  • Air Cooling

    Keeping an engine cool was an ongoing challenge for early engine designers. Many resorted to heavy water cooling systems. Air cooling is quite adequate on rotary engines, since the cylinders are always in motion.
  • No flywheel

    The crankcase and cylinders provided more than adequate momentum to smooth out the power pulses, eliminating the need for a heavy flywheel.
All these factors gave rotary engines the best power-to-weight ratio of any configuration at the time, making them ideal for use in fighter planes. Of course, there were disadvantages as well:
  • Gyroscopic effect

    A heavy spinning object resists efforts to disturb its orientation (a toy gyroscope demonstrates the effect nicely). This made the aircraft difficult to maneuver.
  • Total Loss Oil system

    Centrifugal force throws lubricating oil out after its first trip through the engine. It was usually castor oil that could be readily combined with the fuel. The aircraft’s range was thus limited by the amount of oil it could carry as well as fuel. Most conventional engines continuously re-circulate a relatively small supply of oil.
Most of my information on the Gnome came out of Air board Technical Notes

Diesel Engine

Posted by Unknown

Diesel Engine

The diesel engine was first patented in 1892 by Rudolph Diesel.
                                                       
The diesel is similar to the four stroke, but uses a different method to ignite the fuel.
Diesel intake stroke

Intake

The intake valve opens, and fresh air (containing no fuel), is drawn into the cylinder.
Diesel compression stroke

Compression

As the piston rises, the air is compressed, causing its temperature to rise. At the end of the compression stroke, the air is hot enough to ignite fuel.
Diesel injection step

Injection

Near the top of the compression stroke, the fuel injector drives fuel into the cylinder. The fuel immediately ignites upon contact with the hot compressed air.
Diesel power stroke

Power

As the fuel burns, the gas in the cylinder heats and expands, driving the piston.
Diesel exhaust stroke

Exhaust

The exhaust valve opens, and the exhaust is driven out of the cylinder.
Diesel cam belt

Valve detail

The valves are operated by a variety of mechanisms on diesel and four stroke engines. The engine illustrated here features dual overhead camshafts, sometimes abbreviated DOHC. These are usually driven by a chain or cog belt as shown here.

With his first practical engine in 1897, “Diesel proved to the world that his was the most efficient engine ever built.”8 Diesels are still among the most energy efficient engines available. They are widely used in large trucks, boats, earthmoving machinery, etc.

Two Stroke Engine

Posted by Unknown

Two Stroke Engine


The two stroke engine employs both the crankcase and the cylinder to achieve all the elements of the Otto cycle in only two strokes of the piston.
Two stroke, intake

Intake

The fuel/air mixture is first drawn into the crankcase by the vacuum that is created during the upward stroke of the piston. The illustrated engine features a poppet intake valve; however, many engines use a rotary value incorporated into the crankshaft.
Two stroke, crankcase compression

Crankcase compression

During the downward stroke, the poppet valve is forced closed by the increased crankcase pressure. The fuel mixture is then compressed in the crankcase during the remainder of the stroke.
Two stroke, transfer/exhaust

Transfer/Exhaust

Toward the end of the stroke, the piston exposes the intake port, allowing the compressed fuel/air mixture in the crankcase to escape around the piston into the main cylinder. This expels the exhaust gasses out the exhaust port, usually located on the opposite side of the cylinder. Unfortunately, some of the fresh fuel mixture is usually expelled as well.
Two stroke, compression

Compression

The piston then rises, driven by flywheel momentum, and compresses the fuel mixture. (At the same time, another intake stroke is happening beneath the piston).
Two stroke, power

Power

At the top of the stroke, the spark plug ignites the fuel mixture. The burning fuel expands, driving the piston downward, to complete the cycle. (At the same time, another crankcase compression stroke is happening beneath the piston.)

Since the two stroke engine fires on every revolution of the crankshaft, a two stroke engine is usually more powerful than a four stroke engine of equivalent size. This, coupled with their lighter, simpler construction, makes the two stroke engine popular in chainsaws, line trimmers, outboard motors, snowmobiles, jet-skis, light motorcycles, and model airplanes.
Unfortunately, most two stroke engines are inefficient and are terrible polluters due to the amount of unspent fuel that escapes through the exhaust port.

Four Stroke Engine

The four stroke engine was first demonstrated by Nikolaus Otto in 1876, hence it is also known as the Otto cycle. The technically correct term is actually four stroke cycle. The four stroke engine is probably the most common engine type nowadays. It powers almost all cars and trucks.The four strokes of the cycle are intake, compression, power, and exhaust. Each corresponds to one full stroke of the piston; therefore, the complete cycle requires two revolutions of the crankshaft to complete.

Intake

During the intake stroke, the piston moves downward, drawing a fresh charge of vaporized fuel/air mixture. The illustrated engine features a poppet intake valve which is drawn open by the vacuum produced by the intake stroke. Some early engines worked this way; however, most modern engines incorporate an extra cam/lifter arrangement as seen on the exhaust valve. The exhaust valve is held shut by a spring (not illustrated here).
Otto compression stroke

Compression

As the piston rises, the poppet valve is forced shut by the increased cylinder pressure. Flywheel momentum drives the piston upward, compressing the fuel/air mixture.
Otto power stroke

Power

At the top of the compression stroke, the spark plug fires, igniting the compressed fuel. As the fuel burns it expands, driving the piston downward.
Otto exhaust stroke

Exhaust

At the bottom of the power stroke, the exhaust valve is opened by the cam/lifter mechanism. The upward stroke of the piston drives the exhausted fuel out of the cylinder.

Ignition System

This animation also illustrates a simple ignition system using breaker points, coil, condenser, and battery.
A number of visitors have written to point out a problem with the breaker points in my illustration. In this style ignition circuit, the spark plug will fire just as the breaker points open. The illustration appears to have this backwards.
In fact, the illustration is correct; it just moves so fast it’s difficult to see! Here’s a close-up of the frames just at the point the plug fires:
breaker point closeup
My original intent was to accurately show that the points need to remain closed for only a fraction of a second, called the dwell. By illustrating this, I inadvertently obscured the overall operation of the circuit. Perhaps someday I’ll prepare a more detailed illustration of the ignition system alone.
Larger four stroke engines usually include more than one cylinder, have various arrangements for the camshaft (dual, overhead, etc.), sometimes feature fuel injection, turbochargers, multiple valves, etc. None of these enhancements changes the basic operation of the engine.
Welcome to My Blog

Popular post

Blogger Tips and TricksLatest Tips For BloggersBlogger Tricks

Labels

Popular Post

Blogger templates

- Copyright © Kural Info 4u -Robotic Notes- Powered by Blogger - Designed by Johanes Djogan -